Width selection and welding of composite geomembrane
In the construction of composite geomembrane, in order to ensure the welding speed and welding quality of the project, the measured data of the quantity of the project is used to determine the width of the film, and the width of 6 meters is selected as much as possible because 6 meters belongs to the equipment. The normal width is less waste in production, it is easy to transport in transportation, it is easy to lay in the laying, and there are few welded joints in the large surface. For example, composite geomembrane, in the longitudinal and lateral directions of the production process, the film is separated for welding. The general separation point is about 20~30 cm. The film is welded by hot-melt double-track welding machine, and the cloth is stitched with a sealing machine. Hot air gun bonding, in the welding process to ensure the quality of welding, if there are leaks in the welding process will directly lead to the anti-seepage quality of the composite geomembrane, in this piece you need to pay attention.







