Slope Protection Ecological Bag

The original slope of the slope treated with ecological bags should generally not be greater than 50°, otherwise it needs to be cut first, and then the slope surface needs to be trimmed to achieve the slope leveling effect. If the slope is more than 50 and the back slope is soft and unstable, the height of the side slope constructed by the ecological bag method is relatively low. After the reinforcement measures of the engineering (frame beam) are combined, the ecological bag can be stacked in the frame beam; The bag can be used for 0°-90° slope care, but when the slope is too large, it should be used in combination with other reinforcement measures (anchor rod or gabion net) according to the nature of the back slope (soil or stone); ecological bag barrier When laying the masonry, the horizontal lines should be hung for construction, and the vertical seams of the upper and lower layers should be staggered; during the construction, components such as: ecological bag + engineering buckle + tie belt" should be used, which are composed of a positive triangle and a stable stacking method instead of these components. Simple stacking, without the guidance of systematic scientific theory, it is difficult to form a stable flexible side slope. The connecting buckle should be close to 1/3 of the inner edge, so that each lap buckle spans two eco-bags. By walking on the eco-bag Or the compaction method allows each buckle to penetrate the middle of the eco-bag to achieve the purpose of mutual locking, thereby ensuring good contact between the buckle and the eco-bag, and ensuring the stability of the interlocking structure. The joint between the mouth band and the seam should be placed inside or hidden as much as possible to achieve a neat and beautiful effect. When building eco-bags on the stone or other hard foundation interface, the first row of eco-bags can be anchored Fix or use stainless steel nails to nail the three-dimensional drainage coupling buckle (single-sided nail removal) to the hard interface. Cement mortar can also be used to fix it.