How To Choose A Good Geomembrane?

In anti-seepage engineering, geomembrane is an important anti-seepage material, and it is very important to choose geomembrane of different quality for anti-seepage project. Width is an important indicator of geomembrane, and a wider width can bring many benefits to anti-seepage projects. For projects with large paved areas such as tailings dams or evaporated sugar, a wide-width geomembrane material should be used.

In the anti-seepage project, the welds of geosynthetics are more likely to produce leakage points. The wider the geomembrane width, the fewer welds produced during actual welding construction, and the fewer welds, the less the possibility of leakage, and the higher the safety factor for anti-seepage projects.

Moreover, the increase in the width of the geomembrane and the decrease in welds also bring two other favorable conditions for the anti-seepage project. One is to reduce the lap loss during welding construction: Comparing the geomembrane with a width of 6 meters and a geomembrane with a width of 5 meters, the theoretical loss rate can be reduced by 14%, which is conducive to the reduction of project costs. Another point is that due to the reduction of welding seams, the time and labor required for welding will also be reduced, which can reduce the construction period of the anti-seepage project and the corresponding labor cost. This trend is particularly obvious in some large-scale anti-seepage projects with strict construction period requirements.


You Might Also Like

Send Inquiry