What Kinds That Geomembrane Can Be Divided Into?
They are divided into four categories according to the different geomembranes of the materials produced. Geomembrane plastic film for anti-seepage applications at home and abroad, mainly including polyvinyl chloride (PVC) and polyethylene (PE), EVA (ethylene/vinyl acetate copolymer), and also used in the tunnel application ECB (ethylene vinyl acetate modification) Asphalt blending geomembrane), they are a kind of polymer chemical flexible material with small specific gravity, strong elongation, high adaptability to deformation, corrosion resistance, low temperature resistance and good frost resistance. The standard name of the impermeable membrane is polyethylene geomembrane, which is mainly made of a thermoplastic resin material-polyethylene resin which is milky white translucent to opaque. Polyethylene is a high molecular polymer, non-toxic, odorless, odorless white particles with a melting point of about 110 ° C -130 ° C and a relative density of 0.918 - 0.965. The impermeable membrane has good heat resistance and cold resistance. Good chemical stability, high rigidity and toughness, good mechanical strength, good resistance to environmental stress cracking and tear strength. As the density increases, the mechanical properties and barrier properties will increase accordingly, heat resistance, and tensile strength. The strength is also higher; it can resist corrosion by acid, alkali, organic solvent and the like.
Classification of geomembranes and their properties and applications:
Geomembrane can be divided into four categories according to different materials: plastic geomembrane, steel geomembrane, polyester warp geomembrane and geomembrane.
1. Plastic geomembrane: A plastic geomembrane is stamped on an extruded polymer sheet and then oriented and stretched under heating. Since the polymer of the geomembrane is rearranged and oriented by the heating and stretching processes during the manufacturing process, the bonding force between the molecular chains is enhanced and the strength is improved. Plastic geomembranes are used for roadbeds, embankment reinforcement and shallow foundation reinforcement.
2. steel plastic geomembrane: steel plastic geomembrane is high-strength steel wire, after special treatment, and polyethylene, and add other additives, through extrusion to make it a composite high-strength tensile strip, and then through the vertical and horizontal It is made by welding or clamping in a certain interval and welded by special fusion bonding welding technology. Compared with plastic geomembrane, it has the characteristics of high strength, strong bearing capacity, corrosion resistance, anti-aging, large friction coefficient, uniform hole, convenient construction and long service life. Steel-plastic geomembranes are widely used in soft soil foundation reinforcement, retaining walls and pavement crack-resistant projects for roads, railways, bridges, approach roads, wharves, dams, slag yards, etc.
3. Polyester warp geotextile: Polyester warp yarn geotextile is made of high-strength polyester fiber. The warp and weft yarns in the fabric have no bending state, and the intersection point is bundled with high-strength fiber filament to form a strong bonding point. Play its mechanical properties. The high-strength polyester warp-knitted geotextile film has the characteristics of high tensile strength, small tensile force and high tear strength. The difference between longitudinal strength and lateral strength is small, anti-ultraviolet aging, abrasion resistance, corrosion resistance, light weight, strong locking force with soil or gravel, shear resistance to reinforcing soil, enhancement of soil integrity and Loads have an important role to play.
Polyester warp-knit geomembranes have been widely used in dams, river reinforcement and hydraulic engineering isolation, strengthening soft soil foundations, improving their protective capacity, improving foundation bearing capacity and stability, as well as roads, railways and municipal roads. For example, reinforcement of roadbed soft soil roadbed reinforcement and embankment slope reinforcement, reinforcement of retaining wall, effectively improve the overall strength, can delay the reflection crack of the road
4. Geomembrane: Geomembrane is a geocomposite made of materials, using a certain weaving process and a special coating process.






