The safe method of geotextile usually placed
The plastic geotextile is a regular shape or rectangular mixture mesh formed by stretching. According to the different pulling direction when it is made, it can be unidirectional stretching and multidirectional stretching. It is punched on a polymer sheet (mostly polypropylene or high-density polyethylene) that is restricted by extrusion, and then oriented stretched under heating conditions. The uniaxially stretched grid is only stretched along the length of the sheet, while the biaxially stretched grid is made by continuously stretching the unidirectionally stretched grid in the direction perpendicular to its length. Because in the production of the plastic geotextile, the polymers of the polymer will be rearranged and oriented along with the heating and extension process, which strengthens the joint force between the molecular chains and achieves the purpose of improving its strength. Its elongation is only 10% to 15% of the original sheet. If anti-aging materials such as carbon black are added to the geotextile, it can make it have better durability functions such as acid resistance, alkali resistance, corrosion resistance and aging resistance. Unidirectional geotextile is formed by extruding a high molecular polymer into a thin plate, punching a regular mesh, and then stretching it longitudinally. In this process, the high molecular Oval mesh-shaped overall layout. This layout has appropriately high tensile strength and tensile modulus, especially our company's products have a high pre-international level (elongation rate of 2%-5% ) Tensile strength and tensile modulus. A chain system of commitment and decentralization that provides the soil with aspirational power. This product has high tensile strength (>150Mpa) and is used to various soils. It is currently a widely used reinforcement material. The geotextile roll should be prevented from being damaged before the equipment is assembled and opened. Composite geomembrane geotextile rolls are generally stacked in a flat area with no water, and the height is not more than four rolls, and the identification pieces of the rolls can be seen. Geotextile rolls must be covered with opaque materials to prevent UV aging. During the storage process, keep the label intact and the data intact. The seam of the sewn geotextile includes a line of stitching with chain stitch. The thread used for stitching should be a resin material with a small tension exceeding 60N, and have the ability to resist chemical corrosion and ultraviolet rays appropriately or beyond the geotextile. It is necessary to repair the worn geotextile by laying and hot-joining small pieces of geotextile. The small pieces of geotextile are 200mm shorter in all directions than the margin of the defect. The thermal connection must be strictly controlled to tightly integrate the geotextile patch and geotextile, and there is no harm to the geotextile.






