Composite geomembrane can meet the water-saving and anti-seepage reinforcement of irrigation channel
In the cold area, the stability analysis of the geomembrane anti-seepage structure of the dam must consider the ice pull-out force. Through analysis, the expression of the anti-sliding stability safety factor of the geomembrane anti-seepage structure of the dam is considered. The development status and trends of water-saving and anti-seepage reinforcement technology in irrigation districts in China and the leakage problems in actual operation process are summarized and summarized. Combined with the actual operation of a certain irrigation district channel in the north, after comparing and analyzing the applicable anti-seepage schemes from the aspects of technology and economy, it is decided to use the composite geomembrane anti-seepage and water-saving reinforcement scheme to comprehensively prevent seepage and strengthen the irrigation channel.

The composite geomembrane anti-seepage and water-saving reinforcement and repairing scheme produced by Xinyu can meet the requirements of water-saving and anti-seepage reinforcement in the irrigation area.
(1) It is important to make the geotextile filter cloth closely adhere to the surface of the protected soil, especially in the case of two-way water flow or power flow. The surface of the soil to be protected should be as flat as possible. For uneven areas, sanding should be used for leveling. If, for some reason, the two are detached or have a tendency to detach, the water seepage will stay in the gap between the two, and the soil particles will accumulate in the gap and erode the surface of the soil, or the surface of the fabric will form. The “earth cake” reduces or even loses the water permeability of the fabric, so that the filter layer fails or even breaks. In foreign countries, there are many examples of such wrecks.
(2) The connection of the geotextile can be by stitching or lap joint. The stitching width should not be less than 0.1m, the tensile strength of the joint should be more than 60% of the geotextile, and the overlap width should not be less than 0.3m.
(3) The geomembrane used for the fabric filter on the slope must be carefully calculated for its stability, and the friction coefficient of the large and medium-sized engineering contact surfaces is best measured by the laboratory. You should not find an empirical value in the book. . Examples of engineering failures due to this negligence have been reported abroad (Giroud J P, 2000).
(4) In order to make the fabric filter layer firmly fixed in the place of use, the fixing method has been defined in detail in the "Water Conservancy Code", and will not be repeated here.
(5) During the whole laying process, it is necessary to ensure that the geosynthetic material does not damage the ring. Therefore, it is necessary to cover the laid fabric in a timely and cautious manner. If there is a machine walking on it or a material such as stone is dumped on it, it must be laid. Thick layers of gravel are protected. For damaged fabric materials, repair or replace them as appropriate






